Windows 10 Calendar app not working

Calendar is one of the default Windows 10 apps. These universal apps generally work fine, but some users have found that they don’t always open and launch (now known as emerging issue 70008) or crash just after opening. So if Calendar isn’t working as it should, here are some ways you can fix that app.

Here are some more similar problems you can fix using the solutions presented below:

  • Windows 10 Calendar app won’t open
  • Windows 10 Calendar app crashing
  • Windows 10 Calendar app not responding

What to do if Windows 10 Calendar app stops working

Table of contents:

  1. Check if  Windows Update is Enabled
  2. Check for Calendar app Updates
  3. Run the app Troubleshooter in Windows
  4. Clear the Windows Store Cache
  5. Reset the Calendar app
  6. Re-install the Calendar App
  7. Run the SFC scan
  8. Update Windows
  9.  Uninstall updates

Fix: Calendar app doesn’t work in Windows 10

Solution 1 – Check if  Windows Update is Enabled

Some have reported that Windows apps don’t open when Windows Update is switched off. As such, that might be why the Calendar app isn’t working. You can check the update service is enabled as follows.

  1. Press the Cortana button on taskbar, and enter ‘services’ in the search box.
  2. Select Services to open the window shown directly below.
  3. Then you should double-click Windows Update to open its Properties window.
  4. The Startup type must be configured to either Manual or Automatic. If it isn’t, select one of those options from the Startup type drop-down menu.
  5. Then you should press the Apply button and click OK to confirm the settings.

Solution 2 – Check for Calendar app Updates

Have you switched off the automatic app updates? If so, now might a good time to check for new Calendar updates as follows.

  • Click the Start menu button and then select the Store tile to open that app.
  • Now click your account profile image at the top of the Store window.
  • Then click the Downloads and Updates option on that menu.
  • A window will open that includes a Check for updates button. Press that button to check for Windows app updates.
  • If any updates are found, a total number will appear beside the user profile image along with a list of apps to update. Select to install any updates for the Mail and Calendar app.

Solution 3 – Run the app Troubleshooter in Windows

Windows has various troubleshooters for you to fix things with. One of those is the Windows Store Apps troubleshooter that can fix Calendar and other apps. This is how you can fix Calendar with that troubleshooter:

  1. Go to the Settings app.
  2. Head over to Update & Security Troubleshoot.
  3. Select Windows Store Apps, and go to Run the troubleshooter. 
  4. Wait for the process to finish, and follow further on-screen instructions along the way.
  5. Restart your computer.

Solution 4 – Clear the Windows Store Cache

The Windows Store has its own cache that includes cached downloads. Clearing this cache can be an effective fix for Windows 10 apps. You can do that as follows.

  • First, you should open Run by pressing the Win key + R hotkey.
  • Now type ‘wsreset.exe’ into Run and press OK.

A blank Command Prompt window then opens. Now Command Prompt is clearing the cache, and that window automatically closes soon after. The Store window will then open.

Solution 5 – Reset the Calendar app

Windows 10 now includes handy Reset options for apps. The Reset option effectively restores Calendar to its default settings. This is how you can reset Calendar in Windows 10:

  1. Go to the Settings app.
  2. Head over to Apps Apps & Features. 
  3. Select Mail and Calendar, and go to Advanced options. 
  4. Scroll down and click Reset. 
  5. A small window then opens stating, This will permanently delete the app’s data on this device, including your preferences and sign-in details. Press theResetbutton and confirm.

Solution 6 – Re-install the Calendar App

Another good way to fix Calendar is to re-install it. Even though it’s a native Windows 10 app, and can’t be uninstalled the same way as third-party apps, you can still re-install Calendar to fix it. This is how you can re-install Calendar in Windows 10:

  1. Go to Search, type powershell, and open PowerShell as Administrator.
  2. Type in the following line, and press Enter: Get-AppxPackage Microsoft.windowscommunicationsapps | Remove-AppxPackage
  3. Wait for the process to finish and restart your computer.

Now that you’ve uninstalled the Mail app, it’s time to install it once again. To install the Calendar package again, do the following:

  1. Go to Search, type powershell, and open PowerShell as Administrator.
  2. Type in the following line, and press Enter: dism /online /Add-Capability /CapabilityName:OneCoreUAP.OneSync~~~~0.0.1.0
  3. Wait for the process to finish and restart your computer.

Solution 7 – Run the SFC scan

The next troubleshooting tool we’re going to try is the SFC scan. This is Windows’ own built-in troubleshooter designed to deal with various kinds of problems. Including the app problems. Here’s how to run the SFC scan in Windows 10:

  1. Go to Search, type cmd, and open Command Prompt as Administrator.
  2. Type in the following line, and press Enter: sfc/scannow
  3. Wait for the process to finish and restart your computer.

Solution 8 – Update Windows

Microsoft can sometimes push the updates for Windows features through Windows Update, instead of the Store. So, if none of the solutions presented above managed to resolve the problem, let’s see if we’ll have any luck installing the latest available update for Windows. To check for updates, simply go to Settings > Update & Security, and check for updates.

Solution 9 – Uninstall updates

Contrary to the previous solution, it’s also possible that the latest update you’ve installed actually caused the problem. So, it makes sense to delete that update, and wait for Microsoft to release a new one. Here’s how to do that:

  1. Go to Settings > Updates & Security > Windows Update
  2. Go to Update history > Uninstall updates
  3. Now, find the latest update installed on your computer (you can sort updates by date), right-click it, and go to Uninstall
  4. Restart your computer

Now, hopefully, your Calendar app will be running smoothly once more. The above fixes can also repair many other Windows apps.

Sorry, something went wrong error in SharePoint 2013

Many of use use Office tools frequently, but sometimes issues with Office tools can appear on Windows 10. Users reported Sorry, something went wrong error message in SharePoint 2013, and today we’re going to show you how to fix it.

How to fix Sorry, something went wrong error in SharePoint 2013

Table of contents:

    • Fix – Sorry, something went wrong SharePoint 2013
      1. Change the Require content approval settings
      2. Publish display templates
      3. Delete the recurring calendar appointments
      4. Make sure that the time zone is configured
      5. Configure the Root site collection
      6. Make sure that your domain account has access to SPDataAccess role
      7. Restart the SPTimer service
      8. Check App Management Service
    • Fix – Sorry, something went wrong SharePoint 2013 search
      1. Delete the service application and create a new one
      2. Change the access rights
      3. Be sure that Search Service Application is working
      4. Check if the SharePoint Search Host Controller is running
    • Fix – Sorry, something went wrong SharePoint 2013 workflow
      1.  Create a new workflow with a different name
      2. Use flushdns command
      3. Assign db_owner permissions to your user account
    • Fix – Sorry, something went wrong SharePoint 2013 site collection

Fix – Sorry, something went wrong SharePoint 2013

Solution 1 – Change the Require content approval settings

According to users, Sorry, something went wrong error message can appear due to your Content approval settings. This error appears when you try to save SharePoint site as a template, and in order to fix this problem, you need to follow these steps:

  1. Click the Gear icon and choose Site settings.
  2. Go to Web Designer Galleries section and click on Solution.
  3. Click the Library tab and click on Library Settings.
  4. Now click on Versioning Settings.
  5. Locate Content approval section and set Require content approval for submitted items to No. Click OK to save changes.
  6. Save the site as a template.
  7. After the template is successfully created, you can enable content approval again.

Solution 2 – Publish display templates

Users reported that this error appears if your display templates aren’t published, so be sure to publish them. According to users, uploaded display templates won’t work for non-administrators, and they’ll get Sorry, something went wrong error message. To fix this problem, make sure that display templates are published.

Solution 3 – Delete the recurring calendar appointments

According to users, this error can appear if you import calendars from SharePoint 2003 to SharePoint 2013. It seems that SharePoint 2013 has issues with recurring appointments, and in order to fix this issue it’s necessary that you delete those appointments. If you don’t want to permanently delete your appointments, you can restore them by going to the Site Contents > Recycle Bin and choosing the Restore option. After restoring the appointments, the issue should be permanently fixed.

Solution 4 – Make sure that the time zone is configured

Sometimes this error appears in SharePoint 2013 if your time zone isn’t properly configured. To check time zone settings in SharePoint, do the following:

  1. Open Central Administration > Application Management.
  2. Locate your web application and click the General Settings icon in the Ribbon menu.
  3. Web Application General Settings window will appear.
  4. Check the Default Time Zone.

If the Default Time Zone setting is missing, you need to check if the correct time zone is set on your PC. To do that, follow these steps:

  1. Click the clock in the bottom right corner and choose Date and time settings.
  2. Go to the Time zone section and check if the time zone is correct.

Alternatively, you can also check your time zone by following these steps:

  1. Press Windows Key + S and enter date.
  2. Select Time and date from the menu.
  3. Locate the Time zone section and check if your current time zone is correct. If not, be sure to change it.

Now you just need to go back to Web Application General Settings and set the time zone of your server. Perform iisreset and the problem should be permanently fixed.

Solution 5 – Configure the Root site collection

According to users, this issue can sometimes occur if you don’t have the Root site collection configured. If you create your collection in /Sites/ instead of Root you might experience this error, therefore we suggest to create a Root site collection and check if that fixes this error.

Solution 6 – Make sure that your domain account has access to SPDataAccess role

Improper configuration can sometimes cause Sorry, something went wrong error to appear. In order to avoid this problem in SharePoint 2013 while using Access Services, you need to grant certain permissions to your domain. After granting your account access to the SPDataAccess role in SharePoint configuration database (in SQL Server) the issue will be completely resolved.

Solution 7 – Restart the SPTimer service

Users reported that this error appears while adding apps to SharePoint. This error can be problematic, but it can be fixed simply by restarting the SPTimer service (OWSTIMER.EXE). After restarting the service, the error was completely fixed. In order to avoid these errors in the future, remember to restart SPTimer service every time you make a major configuration change in SharePoint 2013.

Solution 8 – Check App Management Service

This error can appear if the App Management Service isn’t installed, but you can fix it by following these steps:

  1. Open Central Administration as administrator and go to Application Management > Manage Service Application.
  2. Choose New > App Management Service.
  3. Enter the necessary information in Service Application Name, Database Server and Database Name fields.
  4. Select Create new application pool option and enter the name of the application pool.
  5. Click OK to create a new app management service.
  6. After the App Management service is created, go to System Settings > Manage Services on server.
  7. Locate the App Management Service, and under the Action column click Start.
  8. Go back to Manage service applications and check if the Service Application Proxy is started.
  9. Go to Site Settings and click Manage site features in Manage site features section.
  10. Locate Workflows can use app permissions and click Activate button.
  11. Go to Site Settings > Site app permissions.
  12. Copy the client section of the App Identifier between the | and @ characters.
  13. Go to http://{hostname}/{catalog site}/_layouts/15/appinv.aspx.
  14. Paste the client section of the App Identifier to the App ID field and click Lookup.

If you performed all these steps correctly, the error should be completely fixed.

If the issue still persist, we also recommend you to download this tool  (100% safe and tested by us) to scan and fix various PC problems, such as file loss, malware and hardware failure.

Fix – Sorry, something went wrong SharePoint 2013 search

Solution 1 – Delete the service application and create a new one

If you’re getting this error while using the search application, try deleting the service application. After you delete it, create it again and the problem with search should be fixed. After creating a new service application, be sure that it’s set as a default for your application.

Solution 2 – Change the access rights

You can fix this problem by adding Everyone to the Members group. Bear in mind that you need to change the rights to Read Only. This isn’t the best solution, and it’s probably not the safest, so use it at your own risk.

Solution 3 – Be sure that Search Service Application is working

Sometimes Search Service Application can stop working and that can cause Sorry, something went wrong error to appear. To fix this problem, do the following:

  1. Go to Central Administration > Manage web Apps.
  2. Highlight Sharepoint – 80 > Service Connections and make sure that Search Service Application is checked.
  3. Click OK to save changes.

Solution 4 – Check if the SharePoint Search Host Controller is running

SharePoint 2013 relies on certain services in order to run properly, and if SharePoint Search Host Controller isn’t running, you might get Sorry, something went wrong error message while using search in SharePoint 2013. To fix this error, check if SharePoint Search Host Controller is running. To do that, follow these steps:

  1. Press Windows Key + R and enter services.msc. Press Enter or click OK.
  2. When Services window opens, locate the SharePoint Search Host Controller service.
  3. Check the status of the service. If service isn’t running, right click it and choose Start from the menu.
  4. Once you enable this service, close Services window and check if the problem is fixed.

Fix – Sorry, something went wrong SharePoint 2013 workflow

Solution 1 – Create a new workflow with a different name

Users reported that Sorry, something went wrong error message can be caused by deleting and recreating your workflow. To fix this error you need to create a new workflow but use a different name for it. After creating a new workflow with a different name, the error should be completely fixed.

Solution 2 – Use flushdns command

This error can occur due to your DNS, but you can easily fix it by flushing your DNS. To do that, follow these simple steps:

  1. Press Windows Key + X to open Power User Menu and select Command Prompt (Admin) from the menu.
  2. When Command Prompt starts, enter the ipconfig /flushdns.

After running the flushdns command, you might want to recycle Workflow and Service Bus services and try to publish workflow again.

Solution 3 – Assign db_owner permissions to your user account

If you’re getting this error while using workflow UI, you might want to change your permissions. To do that, go to your databases and assign db_owner permissions to your workflow service account in your database.

Fix – Sorry, something went wrong SharePoint 2013 site collection

Solution – Delete the web application

Users reported this error while creating a site collection in SharePoint 2013, and to fix this problem you need to delete the web application you created. After that, follow these steps:

  1. Open IIS Manager and expand the local server at the top left corner.
  2. Select Application pools.
  3. Select Central Administration.
  4. Select Advanced Settings and click Edit application pool in right column.
  5. Edit shutdown time limit. Set a limit to higher value than the default under process model.

After doing this you should be able to create web applications and site collections without any errors.

Sorry, something went wrong SharePoint 2013 error can be caused by many different things, and it might be hard to fix sometimes, but we hope that you managed to fix it by using one of our solutions.

Update error 0x80244019 on Windows 10, 8.1, 7

Keeping Windows and your apps up-to-date is critical for your system’s security. There is an infinite number of threats circulating on the internet, and many of them cause irreparable damage to your computer. Unfortunately, there are many errors that can occur during the update process. In this article, we’re going to focus on the Windows 10 error 0x80244019 and show you how to fix it.

How to fix Windows 10 error 0x80244019

Update error 0x80244019 can be problematic since it can leave your system vulnerable. Speaking of this error message, here are some related issues that users reported:

  • 0x80244019 Windows Server 2016 – This issue can affect Windows Server 2016, and if you have this problem, you might be able to fix it using one of our solutions.
  • Windows 7 update error 0x80244019 – Many users reported this issue on older versions of Windows. Even if you don’t use Windows 10, you should know that most of our solutions can b applied to older versions of Windows as well.

Solution 1 – Check your antivirus

According to users, sometimes your antivirus can interfere with your system and cause error 0x80244019 to appear. To fix the problem, it’s recommended to disable certain antivirus features and check if that solves the issue.

If that doesn’t work, your next step would be to completely disable your antivirus. In worst case scenario, you might have to uninstall your antivirus and check if that solves the issue. If removing the antivirus solves the problem, you should consider switching to a different antivirus software.

There are many great antivirus tools on the market, but if you want an antivirus that will offer great protection without interfering with your system, then we have to recommend Bitdefender.


Solution 2 – Run Windows Update troubleshooter

According to users, sometimes you might be able to fix this problem simply by running Windows Update troubleshooter. As you know, Windows 10 has a wide range of troubleshooters available, and they are specially designed to automatically fix common problems.

If you’re having error 0x80244019 on your PC, you just need to run Windows Update troubleshooter by doing the following:

  1. Press Windows Key + I to open the Settings app.
  2. When Settings app opens, go to Update & Security section.
  3. Select Troubleshoot from the left pane. In the right pane select Windows Update and click Run the troubleshooter button.
  4. Follow the instructions on the screen to complete the troubleshooter.

Once the troubleshooter is finished, check if the problem is still there.


Solution 3 – Change Windows update options

According to users, sometimes your options can cause error 0x80244019 to appear. If you can’t update your PC due to this error, you might have to change your settings a bit. You can do that by following these steps:

  1. Open the Settings app and navigate to Update & Security section.
  2. When Windows Update window opens, click on Advanced options.
  3. Now turn off Give me updates for other Microsoft products when I update Windows.

After turning off this option, the issue should be resolved and you’ll be able to update Windows without any issues.


Solution 4 – Reset Windows Update components

In order to download the updates, certain Windows Update components need to be running. If these components aren’t running, you might encounter error 0x80244019. However, you can fix this problem simply by resetting these components. To do that, you just need to follow these steps:

  1. Press Windows Key + X to open Win + X menu. Now select Command Prompt (Admin) or Powershell (Admin) from the list.
  2. When Command Prompt opens, run the following commands:
  • net stop wuauserv
  • net stop cryptSvc
  • net stop bits
  • net stop msiserver
  • ren C:WindowsSoftwareDistribution SoftwareDistribution.old
  • ren C:WindowsSystem32catroot2 Catroot2.old
  • net start wuauserv
  • net start cryptSvc
  • net start bits
  • net start msiserver

After running these commands the necessary components will be reset and the issue should be resolved. If you don’t want to run these commands manually, you can always create a Windows Update reset script that will automatically reset the necessary components for you.


Solution 5 – Perform a clean boot

Third-party applications can sometimes interfere with your system and cause error 0x80244019 and other update errors to appear. To fix the problem, it’s advised to perform a Clean boot. If you’re not familiar, in Clean boot state your PC will start without any third-party applications or services.

This is a great feature, especially if you’re concerned that a third-party application is interfering with your system. To perform a clean boot, do the following:

click .

  • On the tab > click
  • Right-click each startup item and then click .
  • Close Task Manager > click restart the computer.
  • After disabling all startup applications and services, try to install the update again and check if the issue is still there.


    Solution 6 – Disconnect all USB devices

    In some rare cases, your USB devices can cause error 0x80244019 to appear. If you’re having this problem, it’s advised to disconnect all your USB devices from your PC. This includes external hard drives, USB flash drives, gamepads, printers, etc.

    Basically, you need to disconnect all devices except your keyboard and mouse. After doing that, try to install the update again and check if the problem is still there.


    Solution 7 – Install the update manually

    If you can’t download the latest updates due to error 0x80244019, you might want to try installing the update manually. This isn’t that hard, and in order to do it, first you need to find the KB number of the update. To do that, visit the Windows Update section and look for the KB number of the update.

    Once you find the KB number, you need to do the following:

    1. Go to Windows Update Catalog website.
    2. Enter the KB number in the search field.
    3. List of matching updates will now appear. Select the update that matches your system architecture and download it.

    Once you download the update, install it and check if that solves the issue. Keep in mind that this method won’t fix the core problem, instead you’ll just avoid the error message by downloading and installing the update on your own.


    Solution 8 – Install optional updates

    Windows 10 installs updates automatically, but sometimes you might encounter a problematic update. In order to prevent the update from installing, you need to block it with a special tool. If you want to know more about blocking Windows Updates, we wrote a special article about it, so you should check it out.

    Although blocking updates can help you with certain problems, several users reported that hiding optional updates can cause this problem to appear. Therefore, if you have any optional updates hidden, be sure to unblock and install them.

    After doing that, this problem should be resolved and you’ll be able to install the updates without any problems.


    Solution 9 – Perform an in-place upgrade

    To fix this problem you might have to perform an in-place upgrade. By doing so, you’ll install the latest version of Windows, with all current updates, while keeping your files and applications intact.

    This process is relatively simple, and you can perform it by following these steps:

    1. Download Media Creation Tool and run it.
    2. Select Upgrade this PC now and click Next.
    3. Wait while the setup downloads the necessary files.
    4. Select Download and install updates (recommended).
    5. Wait while setup downloads the updates.
    6. Follow the instructions on the screen until you reach Ready to install screen. Click on Change what to keep.
    7. Make sure that Keep personal files and apps is selected. Now click Next.
    8. Follow the instructions on the screen to complete the setup.

    Once the setup is finished, you’ll have the latest version of Windows installed and the issue should be resolved.

    We hope the solutions listed above helped you fix Windows 10 update error 0x80244019. If you’ve come across other workarounds to fix this problem, you can list the troubleshooting steps in the comment section below.



    ssl_error_rx_record_too_long Firefox error

    Are you getting a ssl_error_rx_record_too_long error when trying to open a website in Firefox over a secure connection with the HTTPS protocol? When that happens, a Secure Connection Failed tab opens with the ssl_error_rx_record_too_long error code. This means that the browser can’t verify the secure data, which is usually due to an SSL certificate that isn’t correctly configured. This is how you can fix the ssl_error_rx_record_too_long error in Firefox.

    How to fix ssl_error_rx_record_too_long in Firefox?

    Firefox is a great browser, but many users reported ssl_error_rx_record_too_long while using it. This can be a big problem, and speaking of this issue, here are some similar issues reported by users:

    • Ssl_error_rx_record_too_long Facebook, Wikipedia, Youtube, Onedrive, Pinterest, Spotify, Dropbox, Google, Gmail – This message can appear while visiting your favorite websites, and if you encounter this message, be sure to try some of our solutions.
    • Ssl_error_rx_record_too_long Windows 7, 10 – This error can appear on any version of Windows, and even if you use Windows 7 or Windows 8.1, be sure to try some of our solutions since they are fully compatible with all versions of Windows.
    • Ssl_error_rx_record_too_long Kaspersky – According to users, your antivirus can cause this issue to appear. Many reported that Kaspersky caused this problem, but even if you don’t use Kaspersky, try disabling your antivirus and check if that helps.
    • Ssl_error_rx_record_too_long VPN – Sometimes your proxy can cause this issue if it’s not properly configured. To fix the problem, check proxy configuration or try using a VPN software.

    Solution 1 – Enter the Site URL With the HTTP Protocol

    A simple fix that may work is to open the website with HTTP instead. All that’s required is to the replace https:// at the beginning of the URL with http://. Open a blank tab and then input the website’s URL again starting with http:// instead.


    Solution 2 – Select the No Proxy Setting

    Open Firefox’s connection settings to check if you’re using a Proxy connection you don’t need. Then, configuring the browser’s No proxy setting might do the trick if you connect directly. You can configure that setting as following:

    1. Press the Open menu button and select Options.
    2. Scroll down to the Network Proxy section and click Settings.
    3. If the browser is configured with a non-essential proxy connection, select the No proxy option there.
    4. Press the OK button and restart Firefox.

    Solution 3 – Open Firefox in Safe Mode

    Firefox, like Windows, has a Safe Mode you can open the browser in. This can help fix various browser errors, including the ssl_error_rx_record_too_long error. Safe Mode will temporarily switch off your add-ons and hardware acceleration and revert Firefox to its default theme. Like this, you might be able to open a website that wasn’t otherwise opening in Firefox.

    1. First, click Open menu and select Help.
    2. Then, you can select the Restart with Add-ons Disabled option.

    3. Press the Restart button to confirm the selected option.
    4. Press the Start in Safe Mode button.
    5. Now try to connect to the website again. Does it open in Safe Mode?

    Solution 4 – Switch off Firefox’s Add-ons

    If the website does open in Safe Mode, then you don’t really need to fix it anymore. However, you might still be able to fix the ssl_error_rx_record_too_long error without opening the browser in Safe Mode. Since the site is opening in Safe Mode, a few add-ons connecting to web servers are probably causing the SSL error. You can switch off Firefox’s add-ons as follows:

    1. If you’re still in Safe Mode, click Open menu > Open Help Menu. Then, select the Restart with Add-ons Enabled option
    2. Type about:addons in the Firefox URL bar and press Enter.
    3. Press the Disable buttons to switch the add-ons off.
    4. Restart the browser, and open the website again.

    Solution 5 – Refresh the Browser

    Restoring a browser to its default settings is always a good fix for various browser issues. This will undo all the settings you’ve configured in Firefox and delete all add-ons and themes, though. You can refresh the Firefox browser as follows:

    1. Type about:support in the URL bar and press Enter. That opens the page tab shown in the snapshot below.
    2. Now press the Refresh Firefox button there.
    3. Click Refresh Firefox in the confirmation window.

    Solution 6 – Check your antivirus

    Sometimes ssl_error_rx_record_too_long error can appear due to your antivirus. Your antivirus can interfere with Firefox and that can lead to this and other similar errors. To fix this problem, try disabling certain antivirus features related to SSL.

    If that doesn’t help, your next step would be to completely disable your antivirus and check if that solves the problem. In worst case scenario, you might even have to remove your antivirus tool completely.

    If removing the antivirus helps, you should consider switching to a different antivirus software. There are many great security solutions on the market, but if you want the best security that won’t interfere with your system, you should consider switching to BullGuard.


    Solution 7 – Check if your proxy settings are correct

    According to users, this problem can appear due to your proxy settings. Your proxy can interfere with Firefox and cause ssl_error_rx_record_too_long error to appear. To fix the problem, it’s required that you configure your proxy properly.

    Once you configure the proxy, check if the problem is still there.


    Solution 8 – Try using a VPN

    If you’re having ssl_error_rx_record_too_long in Firefox, you might be able to fix the problem by using a VPN. In case you’re not familiar, a VPN is a useful tool that can help you protect your privacy online.

    Several users reported that using a VPN fixed this problem for them, so you might want to consider getting a VPN tool. There are many great VPN applications on the market, but one of the best is CyberGhost VPN, so be sure to try it out.


    Solution 9 – Set security.tls.version.max to 0

    Firefox comes with various hidden settings, and if you’re having ssl_error_rx_record_too_long error, you might be able to fix the problem by changing one of these settings. It seems that security.tls.version.max setting is causing this problem, but you can change it by doing the following:

    1. Open a new tab in Firefox, enter about:config and press Enter.
    2. You might get a warning message. Click I accept the risk button.
    3. Enter security.tls.version.max in the search field and double-click security.tls.version.max from the list of results. Now set the value to 0 and click OK to save changes.

    We have to mention that some users are suggesting to change both security.tls.version.min and security.tls.version.max to 2, so you might want to try that as well.

    After doing that, check if the problem is resolved. Keep in mind that this is just a workaround, and changing this setting can sometimes affect your security, so be sure to use this method only as a temporary solution.


    Solution 10 – Install the latest updates

    If you keep getting ssl_error_rx_record_too_long error message in Firefox, you might be able to fix the issue simply by updating Firefox to the latest version. Firefox usually automatically updates itself, but sometimes you might miss a certain update.

    However, you can always install the updates manually by doing the following:

    1. Open Firefox and click the Menu icon in the top right corner.
    2. Choose Help > About from the menu.
    3. A new screen will now appear and you’ll see the current version of Firefox you’re running. If any updates are available, they will be downloaded automatically.

    Once the Firefox is up to date, check if the problem is still there.


    Solution 11 – Reinstall Firefox

    According to users, you might be able to fix ssl_error_rx_record_too_long error simply by reinstalling Firefox. Sometimes your installation can get corrupted and that can lead to this and many other errors.

    However, several users reported that they fixed the problem simply by reinstalling Firefox. There are several ways to reinstall Firefox, but if you want to remove it completely, it’s advised to use uninstaller software. In case you’re not familiar, uninstaller software is a special application that will remove the selected program along with all of its files and registry entries.

    By using one of these tools, you’ll completely remove the selected application ensuring that there are no leftover files. If you’re looking for a simple but powerful uninstaller software, we recommend trying IOBit Uninstaller.

    Once you remove Firefox with this tool, download the latest version from Mozilla’s website and install it again. Several users also suggest using Beta or Nightly versions of Firefox. These versions might not be as stable, but they should have the latest fixes available, so if you’re having this problem, Beta or Nightly version might be just what you need.


    Solution 12 – Temporarily switch to a different browser

    If you keep getting ssl_error_rx_record_too_long error in Firefox, you might want to consider switching to a different browser until the issue is resolved. Before you switch, be sure to export your browsing history and bookmarks.

    Now run Google Chrome or Edge and check if the problem appears. If not, import your browsing history and bookmarks. Keep in mind that this is just a temporary solution, and once you manage to fix the problem, you can go back to Firefox.

    Those are some of the best fixes to resolve the ssl_error_rx_record_too_long error in Firefox. This windows article also provides more general fixes for Firefox that might come in handy.



    Windows 10 update error 0x800f0900

    Windows 10’s latest major update, the April Update (1803), proved hard to install for so many users. Even though more than half Windows 10 users have April Update installed, a good number is still plagued with update/upgrade errors. One of the most repetitive errors goes by the code ‘0x800f0900‘. Affected users are prompted by the error and the system is either rolled back to previous major update or the boot loop sequence appears.

    Luckily, there’s a way to solve this error. Or, in this case, 10 different ways, just to confirm that all the possible culprits are covered. If you’re unable to address this, follow the steps we enlisted below.

    How to fix  the update error 0x800f0900 in Windows 10

    1. Make sure you can upgrade to 1803 in the first place
    2. Run Windows Update troubleshooter
    3. Clean temporary files
    4. Run SFC and DISM
    5. Restart Update services
    6. Remove peripheral devices
    7. Uninstall the antivirus
    8. Update with Update Assistant
    9. Use Media Creation Tool
    10. Perform a clean reinstall

    1: Make sure you can upgrade to 1803 in the first place

    To our knowledge, system requirements stay the same for update 1803 a.k.a the April Update as they were for Windows 10. Here are the current specifications you’ll need to meet in order to run Windows 10 (1803):

    • RAM: 1GB for 32 bit and 2GB for 64 bit
    • Hard disk space: 16 GB for 32 bit and 20 GB for 64 bit
    • CPU:1GHz or faster
    • Screen resolution: 800 x 600
    • Graphics: Microsoft DirectX 9 or later with WDDM 1.0 driver
    • Internet access

    However, there are some novelties concerning certain devices. As we already reported, there’s an issue with Intel-produced SSDs. In addition, Microsoft evidently discontinued support for Conexant MEDIA Sound Drivers. Hence, the devices with the Conexant Legacy sound drivers are hardly upgradable.

    Furthermore, make sure that you have a stable connection throughout the whole update process. This is of the utmost importance and the lack of a stable network is a known culprit for update errors.

    2: Run Windows Update troubleshooter

    Let’s start the troubleshooting by using the dedicated tool for the job. The Windows Update troubleshooter is, probably, the most used of all tools stashed in the unified menu. This built-in tool should restart the update procedure and fix possible stalls. After that, you should be able to update Windows 10 to April Update in a standard manner.

    Here’s how to run Windows Update Troubleshooter:

    1. PressWindows key + Ito summon the Settings app.
    2. SelectUpdate & Security.
    3. Choose Troubleshootfrom the left pane.
    4. ExpandWindows Update Troubleshooterand click Run the troubleshooter.

    3: Clean temporary files

    You’ve probably have heard of (or even tried out) the rollback option available in the Recovery menu. Namely, Windows 10 stores installation for the previous version so you can, if something goes awry, roll back the system. On paper, this is great. However, some users suggested that cleaning these and other temporary files can resolve the 0x800f0900 error.

    Here’s how to run the Disk Cleanup and clear all redundant files:

    1. OpenThis PCorFile Explorer.
    2. Right-click on the partition you want to relieve of unnecessary data and openProperties.
    3. Click onDisk Cleanup.
    4. Clean up system files option.
    5. Check all boxesOK

    4: Run SFC and DISM

    If there’s the case of corruption within the system files, Windows offers two different (but similar) utilities. The first tool is SFC or System File Checker which, upon running, verifies the integrity of the system files. The more advanced alternative is DISM (Deployment Image Servicing and Management) tool which fixes the more complex system errors. It can use Windows Update resources to replace the damaged files. Both are run via the elevated command-line.

    Here’s how to run SFC in Windows 10:

    1. Open Command Prompt as admin.
    2. In the command-line, type sfc/scannow and press Enter.
    3. Wait until the scan ends and restart your PC.

    And this is how to run the DISM utility:

    1. Right-click on theCommand Prompt and run it as an administrator.
    2. In the command line, copy-paste these lines one by one and press Enter after each:
      • DISM /online /Cleanup-Image / ScanHealth
      • DISM /Online /Cleanup-Image /RestoreHealth
    3. Wait until the procedure ends (it might take some time).

    5: Restart Update services

    Similarly to every other application, Windows 10 updates are downloaded and stored prior to installation. This procedure accompanies various services and one folder (SoftwareDistribution). Occasionally, at least one cog in this machine will fail and the update process will result in an error.

    This can be done manually, via the Command Prompt, or you can run the batch (script) file which automatizes this procedure. The whole simplified procedure is explained, here.

    6: Remove peripheral devices

    Peripheral devices (or more importantly, their respective drivers) can bring a bag of update issues. The problem with legacy drivers and Windows 10 is well-known, but still hard to resolve as the functional drivers lack and generic drivers won’t suffice. Besides looking for and installing drivers by hand, we can only recommend uninstalling all peripheral devices and removing them during the update procedure.

    After the major update is successfully installed, you can reconnect the device (or devices) and look for updates. Just don’t forget to disable the driver updates if you manage to find the working legacy driver and install it manually.

    7: Uninstall the antivirus and enable Clean Boot

    As the hardware might cause the update error at hand, the same goes for software. Various third-party applications can cause update errors, especially concerning major updates. This especially applies to third-party antivirus solutions which tend to cause a chaos during the updating process. Because of that, we recommend disabling or uninstalling the third-party antivirus until the updates are successfully administered.

    In addition, you can navigate to Task Manager > Startup and disable all non-Microsoft programs from starting with the system. This way, you’ll avoid possible issues with third-party programs.

    8: Update with the Update Assistant

    Updating Windows 10 via the standard OTA updates was far from flawless since the introduction. Especially when updates are major releases — basically different versions of the system. Much better option than relying on standard updates is to use one of the two tools and update to April Update manually.

    The first tool is Update Assistant and you can find it here. Just run it and wait for the confirmation. After that, just follow the instructions and wait until the update is administered. If the ‘0x800f0900’ error reoccurs, continue with the steps below.

    9: Use Media Creation Tool

    If the Update Assistant utility fails, you can still use Media Creation Tool to install Windows 10 updates. Now, there are, in my knowledge, two ways to install updates with Media Creation Tool. First one includes updating the system via the tool and the second concerns bootable drive or ISO file.

    You can try both ways and see for yourself. Follow the steps to find out how:

    1. DownloadMedia Creation Tool by following thislink.
    2. Right-click on the tool and choose to run it as an administrator.
    3. Licence Terms
    4. Upgrade this PC.
    5. If the issue is persistent, plug in the USB drive (6 GB or more) and restart Media Creation Tool.
    6. Click on the Create installation media (USB flash drive, DVD, or ISO file) for another PC option.
    7. language, architecture, and editionNext.
    8. USB flash drive and then click Next
    9. After the bootable drive is created, restart your PC.
    10. Open the USB with installation media and click Setup.
    11. Update Windows 10.

    10: Perform a clean reinstall

    Finally, if none of the previously recommended steps did any good, the clean reinstallation is the only viable solution within our grasp. We made sure to explain the whole procedure, here. It won’t take too much of your time and you still get to keep your data. Of course, you’ll need to back up files from the system partition on the secondary partition or an external drive. The bootable thumb drive you’ve created with Media Creation Tool in the previous step should be good enough to reinstall the system.

    That’s it. Hopefully, one of the steps got you into clear and the update error ‘0x800f0900’ isn’t plaguing you anymore. Don’t forget to share your success or provide alternative solutions in the comments below.

    Files Open in the Wrong Program on Windows 10, 8.1, 8, 7

    When opening files with the wrong program in Windows 10, 8, this most likely prevent you from running that program correctly or it will not run at all. So, if you want to watch a movie, listen to music or open a Word document for work, you need to set the right program to open the respective files.

    Opening your files in a wrong program in Windows 10, 8 is a common mistake but luckily Windows 10, Windows 8 come with a very easy app to set the default program for a specific file that you want to open. This way, every time you open a movie, for example, your PC will choose the program you set as default for movie type files.

    Files open in the wrong program on Windows 10, 8.1, 7

    1. Use the context menu
    2. Use the Settings page

    1. Set a default program for opening files using the context menu

    On Windows 8, 8.1:

    1. Click (right click) on the file you want to open.
    2. Click (left click) in the context menu on the option that says Open With
    3. Click (left click) in the Open With menu that you opened on Choose Default program.
    4. A Window with the first line saying How do you want to open this file? will pop up.
    5. Be sure you have checked the box next to Use this app for all *** files (*** being the extension you have on the file. Example: .txt or .avi depending on the type of file you want to open).
    6. If you don’t have the program you want to run your file in that list click(left click) on More options situated in the lower side of the window.
    7. In the More options window you will have a bigger list of your Windows 8 operating system PC or laptop programs to choose the correct program you want to run your files with.
    8. If you don’t have your desired program in the More options list then you will have to click(left click) on:
      Look for an App in the store which will lead you to the App store where you can download your desired program
      Or: Look for another App on this PC which will open your explorer to search your Windows 8 system for the desired program if you have already installed it.

    Set default program for opening files on Windows 10:

    The steps to follow on Windows 10 are quite similar. All you need to do is right-click on the file you want to open and select ‘Choose another app’. This will open a new window where you can set the default program to use in order to open the respective type of file. Simply check the option ‘Always use this app to them files‘.

    2. Use the Settings page

    You can also set the default apps for opening specific files and folders from the Settings page.

    1. So, go to Settings and select Apps and then click on ‘Default Apps’, as shown in the screenshot below.
    2. Now, click on the type of content that you want to open.
    3. A drop-down menu will appear on the screen, allowing you to select the default program to use.

    There you have it, this is how you change the default program for opening files on Windows 10. Follow the instructions listed above to set the correct program for the files you want to open.


    How to keep using old Skype versions on Windows 10, 8, 7

    You might be content of using older versions of Skype in your Windows 7, Windows 8 or Windows 10 operating systems for several reasons. The fact of the matter is that Microsoft won’t provide any support for older versions of this application. But don’t worry and continue reading this guide to learn how to use older Skype versions even on Windows 8, Window 10 or Windows 7.

    Normally, Windows allow you to install a Skype version older than Skype 6.13. It will mainly prevent you from signing in as you normally would. But users might not like the new versions of Skype because, for one thing, they will not allow you to block the advertisements in the application. Also, the newer versions of Skype take up a huge part of your Windows 8, Windows 10 memory thus slowing down your computer.

    How to make old Skype version work in Windows 10, 8, 7

    1. Create a backup copy of the old Skype .exe file

    1. You will need to create a backup copy of the executable file you have for the older version of Skype.
      Note: You can copy the backup on your USB stick or portable hard drive.
    2. Go to the Windows store and install the latest version of Skype you have for Windows 8 or Windows 10 operating systems.
    3. Log into Skype as you normally do but be sure to check the box next to the Automatic sign in feature.
    4. Now close the Skype app.
    5. Go to your C:/ partition in Windows and double click (left click) on the Program Files folder you have there.
    6. Now in the Program Files folder you should have the Skype app folder.
    7. In the Skype folder you will need to replace the executable file with the one you had from the older version of Skype you want to use.
    8. Double click (left click) on the executable file after you replaced it .
    9. After you run the executable you will be able to run the older version of Skype because you already saved your user account data with the new version.
    • RELATED: 4 best VPN software for Skype to download for free in 2018

    2. Use Skype’s config.xml file

    1. Install Skype from the Windows store.
    2. After the installation is completed you will need to sign in again with your user account and password.
      Note: Check again the box next to Auto sign in when starting Skype
    3. Close the Skype version after you signed in.
    4. Open the Skype app again.
    5. Press and hold the button Windows and the button R.
    6. Write in the Run window you opened the following line %APPDATA%Skype
    7. Go to your user account folder, open it and locate the config.xml folder with your account information.
    8. Now, run the older version of Skype by double clicking (left click) on the executable file.
    9. You will see that it will sign in automatically.
      Note: it will ask you to update the Skype app but you can skip this pop up message and continue your work.

    Speaking of using old Skype versions, you can download and install  the classic Skype for Windows Desktop from Microsoft’s website.

    There you have two ways on how to continue using your old Skype version. Use the comments section below to let us know if these methods worked for you or not.

    UPDATE: It seems that using old Skype versions on Windows 10 is going to get more difficult. Microsoft already started pushing users to upgrade to the new Skype version. Many users are also complaining about the constant reminders that there’s a new Skype version in town and they fear that the Redmond giant will force the to upgrade at some point:

    Every time I log in to the old Skype now I get the screen asking me if I want to upgrade, I also get it when I log out. That didn’t happen for quite some time after I reinstalled the old version. I think MSN is going to force us to upgrade at some point soon. I dread that; they don’t seem able to make the new version work and don’t care.

    So, what’s your take on this situation? Are you planning to install the new Skype version in the future?


    Rstrui.exe errors in Windows 10, 8.1, 7

    Rstrui.exe is a Windows 10 file responsible for System Restore and is located in a subfolder of C:WindowsSystem32. In other words, the rstrui.exe file is an essential part of Windows 10, allowing users to revert their computer’s state to that of a previous point in time. This feature enables the OS to recover from system malfunctions or other problems.

    When you recover system files, applications, the Windows Registry, and other system settings, your system can perform these actions thanks to the rstrui.exe file. Unfortunately, sometimes the file doesn’t work properly due to a series of errors.

    Rstrui.exe problems, how to fix them?

    Rstrui.exe is closely related to System Restore feature, and if you’re having problems with rstrui.exe, you won’t be able to perform System Restore anymore. This can be a big problem, and speaking of issues, here are some common problems reported by users:

    • Rstrui.exe no restore points – This issue can occur due to your settings. To fix the problem, be sure to check System Restore settings and make sure that the feature is enabled.
    • Rstrui.exe not working, won’t run, not recognized – Sometimes file corruption can cause this problem to occur. To fix the issue, perform both SFC and DISM scans.
    • Rstrui.exe error Windows 7, 8.1, 10 – This issue can appear on any version of Windows, and even if you don’t use Windows 10, you should be able to apply most of our solutions to your PC.
    • Rstrui.exe application error – In some rare cases, this problem can occur due to malware infection, so if you want to ensure that your PC is safe and free from malware, be sure to perform a detailed scan.
    • Rstrui.exe missing – This problem can sometimes be caused by certain bugs on your system. However, you should be able to fix the problem by installing the latest updates.
    • Rstrui.exe entry point not found – In some cases, this issue can occur due to problems with your registry. Simply clean your registry and check if that solves the problem.
    • Rstrui.exe access denied – Your user account can sometimes cause this issue to appear. To fix the problem, create a new user account and check if that helps.

    Quick solution to fix various PC problems

    • Step 1: Download this PC Scan & Repair tool
    • Step 2: Click Start Scan to find Windows issues that could be causing .exe errors in Windows 10
    • Step 3: Click Start Repair to fix all issues.

    Solution 1 – Use the System File Checker tool to repair missing or corrupted system files

    If you’re having problems with rstrui.exe on your PC, the problem might be caused by corrupted system files. This can be a big problem, but you can easily fix it by running an SFC scan. To do that, you just need to follow these steps:

    1. Press Windows Key + X to open Win + X menu. Now choose Command Prompt (Admin) or Powershell (Admin) from the menu.
    2. When Command Prompt starts, enter sfc /scannow and press Enter.
    3. SFC scan will now start. Keep in mind that this scan can take about 10 minutes, so don’t interrupt it.

    Once the scan is finished, check if the problem is still there. If the issue is still present, or if you can’t run SFC scan at all, you’ll need to use DISM scan instead. To do that, follow these steps:

    1. Start Command Prompt as an administrator.
    2. Now enter the following command: DISM /Online /Cleanup-Image /RestoreHealth

    3. The scan can take about 10-20 minutes, so don’t interrupt it.

    Once the DISM scan is finished, the problem should be resolved. If the issue is still there or if you couldn’t run SFC scan before, try to run it again and check if that solves the problem.


    Solution 2 – Scan your computer for malware

    Sometimes issues with rstrui.exe can occur due to malware infections, and in order to fix the problem, you need to check your PC for malware. Windows 10 already has a decent built-in antivirus tool called Windows Defender, but sometimes you might need to use a different tool to deal with malware.

    Even though Windows Defender provides solid protection, it doesn’t have certain advanced features. If you want an antivirus tool that provides maximum security, we strongly suggest that you consider Bitdefender.

    Once you scan your system and remove all malware, check if the problem is still there.


    Solution 3 – Repair the Windows Registry

    In some cases, the problem might occur due to issues with your registry. A corrupted registry entry might cause issues with rstrui.exe, and to fix the problem, you need to find and remove the problematic entries.

    Doing this manually can be a big problem, so it’s better to use a registry cleaner software. We already covered the best registry cleaners for Windows 10, but if we have to recommend one tool to use, our pick would be Advanced SystemCare.

    After you clean your registry, the problem should be completely resolved and everything will start working again.


    Solution 4 – Update your computer drivers

    In some cases, the problem with rstrui.exe can be caused by your system. Your operating system might suffer from certain glitches, and that can cause problems to occur. Microsoft is constantly fixing problems using Windows updates, so if you’re having any problems, be sure to download the latest updates.

    Windows 10 downloads the missing updates automatically in the background, but you can always check for updates manually by doing the following:

    1. Open the Settings app. You can do that instantly by pressing Windows Key + I.
    2. Now navigate to Update & Security section.
    3. Click Check for updates button.

    If any updates are available, they will be downloaded automatically in the background and installed as soon as your PC restarts. Once your PC is up to date, check if the problem is still there.

    In addition to updating your system, it’s advised to update your drivers as well. You can do that manually, but that can be a tedious task, but you can also use a specialized software that will download the missing drivers for you.

    If you want to quickly update all your drivers, we suggest that you download this Driver Update software that does it all automatically. It will download all the outdated drivers on your system and will make sure you always get the newest ones, without any effort from your side.


    Solution 5 – Clean install Windows 10

    If none of the above solutions helped you, you may need to perform a clean installation of Windows. Reinstalling Windows will delete everything from your hard drive, and will remove all the junk accumulated.

    In order to avoid data loss, don’t forget to back-up all of your important documents before performing the clean installation.

    For more information about the steps to follow in the process, check out our article on how to clean install Windows 10.


    Solution 6 – Create a new user account

    If you’re having problems with rstrui.exe, the issue might be your user account. Your account can get corrupted, and that can lead to this and many other errors. To fix the problem, the simplest way would be to create a new user account. This is quite simple to do, and you can do it by following these steps:

    1. Open the Settings app and go to the Accounts section.
    2. In the left pane, select Family & other people. Now choose Add someone else to this PC.
    3. Choose I don’t have this person’s sign-in information.
    4. Select Add a user without a Microsoft account.
    5. Enter the desired user name and click Next.

    After creating a new user account, switch to it and check if the problem is still there. If not, you might have to move all your personal files from the old account to your new one and start using it instead of your old one.


    Solution 7 – Try using Safe Mode

    According to users, sometimes you can fix the problems with rstrui.exe simply by using Safe Mode. Users reported that System Restore feature didn’t work for them, but they were able to use it from Safe Mode.

    In case you’re not familiar, Safe Mode is a segment of Windows 10 that runs with default drivers and settings, which makes it perfect for troubleshooting. To access Safe Mode, you need to do the following:

    1. Open the Settings app and go to System & Security section.
    2. Go to Recovery tab and in the Advanced startup section choose Restart now.
    3. List of options will now appear. Choose Troubleshoot > Advanced options > Startup Settings. Now click the Restart button.
    4. Once your PC restarts, you’ll be presented with a list of options. Select any version of Safe Mode by pressing the corresponding key.

    Once you enter Safe Mode, try to perform System Restore again and check if the problem is resolved.

    If you’ve found other workarounds to fix rstrui.exe errors, you can help the community by listing your fix in the comment section below.



    How to pin Settings to the Start Menu in Windows 10

    As we go on with the latest updates of Windows 10, we keep on discovering interesting new features. In this post, we’re going to talk about one of them, which is the possibility to add your favorite Settings to the Start menu. So if you want to find out how you can pin particular Settings pages located in the Settings application to the Start menu of Windows 10, follow this tutorial and the steps listed below.

    Beside pining Settings to the Start menu, in  this tutorial, you will also find out how to unpin the respective Settings options. In order to start the pining steps, go to the Settings page first located in the Start menu and continue from there.

    How can I pin Settings to Start menu in Windows 10?

    1. Use the Pin to Start menu

    1. Left click or tap on the Start feature.
    2. From the Start menu left click or tap on the Settings feature situated in the upper left side of the menu.
    3. Now you should have the Settings window in front of you.
    4. Left click or tap on the setting you wish to pin to the Start Menu of Windows 10.
    5. Now in the upper side of the Settings window next to the search dialog box you will have a Pin icon.
    6. Just left click or tap on the Pin icon and the setting you selected will be pinned to the Start menu in Windows 10
      Note: After you pin a specific setting to the Start menu you will also notice that the Pin icon will change thus notifying you that the setting is already pinned.
      Note 2: You can do the same steps for all the settings you wish to pin to the Start menu of Windows 10.

    The latest Windows 10 OS versions also allow you to pin your favorite Settings page to the Start menu by simply right-clicking in the respective Settings page. Once you’ve done that, a quick Pin to Start menu will appear that lets you set the respective Settings page to the Start menu.

    — RELATED: SOLVED: VPN application blocked by security settings

    2. Create a desktop shortcut

    If you want to quickly access certain Settings pages, you can also create a Settings shortcut on the desktop as an alternative to pinning Settings to the Start menu. All you need to do is right-click on your desktop, select New > Shortcut. A new window will pop-up allowing you to select the page that you want to add to the shortcut.

    Here is the list of all the Settings commands in Windows 10:

    If you wish to unpin the Setting from the Start menu read the lines below:

    1. Open the Start menu.
    2. Find the Setting you wish to unpin from the list.
    3. Right click or hold tap on that setting.
    4. From the menu that appears left click or tap on the Unpin from Start feature.
      Note: Another quick way to unpin a setting is by going again to the Settings window as you did before, clicking on the setting you wish to unpin and left click or tap on the icon presented next to the search dialog box.

    And you are all done, you now know exactly how to pin your Modern settings situated in the Settings app to the Start menu of your Windows 10 build 10041. Also along the way in this tutorial if you encounter any difficulties during the steps you are welcome to as us for help by writing in the comments section of the page situated below and we will help you further as soon as possible.


    Keyboard not working in Google Chrome

    Chrome is one of the most popular web browsers on Windows 10 platform with millions of users worldwide. Users reported one strange problem on Google Chrome, and according to them, the keyboard isn’t working in Chrome. This is a serious problem, but there are a few solutions that you can try.

    Keyboard not working in Google Chrome, how to fix it?

    Many users reported that their keyboard isn’t working properly in Google Chrome. This can be a big problem, and speaking of this issue, here are some similar problems that users reported:

    • Keyboard not working in browser – This issue can affect almost any web browser, and if you encounter it, be sure to disable your antivirus and check if that helps.
    • Backspace and arrow keys not working in Chrome – If certain arrow keys aren’t working in Chrome, it’s possible that an extension is blocking them. To fix this issue, disable all extensions and check if that helps.
    • Keyboard not working only in Chrome – According to users, sometimes this issue can appear only in Google Chrome. If that’s so, just update Chrome to the latest version and the problem should be resolved.

    Solution 1 – Press the Windows Key twice

    This is a simple workaround, but it works according to users. If your keyboard isn’t working in Google Chrome, you can easily fix this problem by pressing the Windows Key twice. After doing that, your keyboard should start working in Chrome. This is an unusual workaround, but it works according to users, and you’ll have to use it every time your keyboard stops working.

    You can also open Task Manager by pressing Ctrl + Shift + Esc to fix this problem, or you can simply switch to any different application and then switch back to Chrome again.


    Solution 2 – Disable Hardware acceleration and extensions

    According to users, keyboard problems in Chrome can occur due to hardware acceleration or installed extensions. One solution that users suggested is to disable hardware acceleration in Chrome, and you can do that by following these steps:

    1. Click the Menu icon in the top right corner and choose Settings from the menu.
    2. Scroll to the bottom of the page and click on Advanced.
    3. Scroll down to the System section and uncheck Use hardware acceleration when available option.
    4. After you uncheck this option restart Chrome and check if the problem is resolved.

    If the issue still persists, you might have to disable browser extensions. To do that, follow these steps:

    1. Press the Menu button, go to More Tools and select Extensions.

    2. List of extensions will open. Be sure to disable all extensions by unchecking the little switch next to it.
    3. After disabling all extensions, restart Chrome and check if the problem is resolved.

    Users reported that IDM extension can cause this error, but even Google’s extensions such as Google Docs or Google Docs Offline can cause this issue to appear, so be sure to disable them all. If disabling the extensions fixes the problem, you should try enabling extensions one by one until you find the one that is causing this problem. After finding the problematic extension, you can update it or remove it from Chrome.


    Solution 3 – Check your antivirus

    According to users, if your keyboard isn’t working properly in Google Chrome, the issue might be your antivirus. Several users reported that Kaspersky antivirus can cause this issue to appear, so be sure to restart it and check if that helps.

    If you don’t use Kaspersky, you can try disabling certain antivirus features of your antivirus software, or disable the antivirus altogether. If that doesn’t help, your next step would be to uninstall your antivirus software entirely.

    After you uninstall your antivirus, check if the problem is still there. If not, this might be a good time to consider switching to a different antivirus solution. There are many great antivirus tools on the market, but if you want maximum protection that won’t interfere with your system, we suggest that you try BullGuard.


    Solution 4 – Clean Chrome’s cache

    Users suggest that you can fix this problem by cleaning Chrome’s cache. To do that, follow these steps:

    1. Press the Menu icon in the top right corner and choose Settings.
    2. Scroll all the way down and click Advanced.
    3. Click on Clear browsing data.
    4. Set the Time range to All time and click the Clear data button.
    5. After the cleaning process is completed, restart Chrome and check if the issue is resolved.

    Solution 5 – Try using Incognito Mode

    Incognito Mode is designed not to store any files in the cache, and it’s great if you don’t want to leave any browsing history on your PC. According to users, your keyboard should work fine in Incognito Mode in Chrome, and in order to start Incognito Mode do the following:

    1. Click the Menu button in the top right corner.
    2. Select New incognito window from the menu.

    A new incognito window will now open, and your keyboard should start working normally.


    Solution 6 – Reinstall Chrome

    If the keyboard isn’t working in Chrome, you might be able to fix this problem simply by reinstalling it. Your installation can get corrupted, and that can lead to this and many other errors.

    To ensure that your data isn’t removed, we advise you to sign-in to Chrome and sync your data. There are several ways to uninstall Chrome, but the most effective one is using the uninstaller software such as Revo Uninstaller.

    In case you’re not familiar with it, uninstaller software is a special application that can remove any software from your PC. In addition to removing the application, it will also remove all files and registry entries associated with the application.

    Once you remove Chrome, install it again and check if the issue reappears.


    Solution 7 – Update Chrome

    Another way to fix this problem in Chrome is to update it to the latest version. By default, Chrome does this automatically, but sometimes you might miss an update. However, you can check for updates manually on your own by doing the following:

    1. Click the Menu icon in the top-right corner.
    2. Choose Help > About Google Chrome.
    3. A new tab will now appear and check for available updates. If any updates are available, they will be downloaded automatically.
    4. Once the updates are downloaded, restart Chrome and check if the issue is resolved.

    If downloading the latest updates doesn’t solve the problem, you might want to consider using Beta or Canary version. These two versions often have the latest updates that are yet to be released to the public, so if this problem keeps appearing in Chrome, be sure to try the Beta version.

    On the other hand, if you want to test the latest updates and fixes, the Canary version might be perfect for you. Keep in mind that the Canary version is experimental, so new issues can sometimes appear with it.


    Solution 8 – Reset Chrome

    According to users, if your keyboard isn’t working in Chrome, you might be able to fix the problem simply by resetting it to default. Sometimes your Chrome profile can get corrupted or an extension can interfere with it.

    To fix the problem, it’s advised that you reset Chrome to the default and check if that helps. This is rather straightforward, and you can do it by following these steps:

    1. Open the Settings tab in Chrome.
    2. Scroll all the way down and click Advanced to reveal additional settings.
    3. Now click Restore settings to their original defaults.
    4. Click Reset settings button to confirm.

    After Chrome resets your settings to default, it will restart itself. Once the browser restarts, check if the issue is still there.


    Solution 9 – Check for startup applications

    Sometimes third-party applications can interfere with Chrome and cause this and many other issues to appear. To fix this problem, it’s advised that you perform a Clean boot and disable startup applications. To do that, follow these steps:

    1. Press Windows Key + R and enter msconfig. Press Enter or click OK.
    2. When System Configuration window opens, go to Services tab. Check Hide all Microsoft services and click Disable all button.
    3. Go to the Startup tab and click Open Task Manager.
    4. When Task Manager opens, right-click the first item on the list and choose Disable. Repeat this step for all startup items.
    5. After you disable all startup applications, close Task Manager and go back to System Configuration window. Now click Apply and OK to save changes. Restart your PC.

    When your PC restarts, check if the problem is still there. If the issue doesn’t appear, try enabling applications and services in groups. Keep in mind that you’ll need to restart your PC in order to apply changes.

    Once you find the application that is causing this problem, you need to keep it disabled or remove it from your PC.

    Not being able to use your keyboard in Google Chrome can be a major problem, but we hope that our solutions helped you solve this issue.